Stock lengths and reinforcing bar
Grade 300E and 500E reinforcing bar, plain and deformed, in NZ trade sizes R, D, HR and HD.
Supplied and delivered to site
We offer highly competitive pricing on standard and specialist reinforcing mesh, with efficient supply and direct-to-site delivery. As part of United Industries, a wider New Zealand manufacturing group, we have the backing to keep supply reliable.
Order mesh together with your reinforcing bar, cut-and-bend steel and prefabricated cages for one quote and one point of contact. We deliver mesh direct to your site, so it arrives when the slab crew needs it.
We deliver across Auckland and the North Island: see areas we deliver to.
Ductile mesh is made to AS/NZS 4671:2019 in Grade 500E (500 MPa yield strength, earthquake ductility class E). DE means double edge: extra edge wires so sheets can be lapped with less steel.
| Designation | Main wire diameter | Wire spacing | Edge wires | Stocked |
|---|---|---|---|---|
| SE62 | 6.1 mm | 200 x 200 mm | - | Yes |
| SE72 | 7.0 mm | 200 x 200 mm | - | Yes |
| SE72DE | 7.0 mm | 200 x 200 mm | 6.1 mm (double edge) | Yes |
| SE73DE | 7.5 mm | 300 x 300 mm | 6.1 mm (double edge) | Yes |
| SE82 | 8.0 mm | 200 x 200 mm | - | Yes |
| SE82DE | 8.0 mm | 200 x 200 mm | 6.1 mm (double edge) | Yes |
| SE91 | 9.0 mm | 100 x 100 mm | - | Yes |
| SE92 | 9.0 mm | 200 x 200 mm | - | Yes |
| SE92DE | 9.0 mm | 200 x 200 mm | 6.1 mm (double edge) | Yes |
| SE102 | 10.0 mm | 200 x 200 mm | - | Yes |
Hard-drawn mesh is low-ductility (Class L) mesh. It does not meet the Grade 500E requirement for slabs-on-ground built to NZS 3604, so use it only where your designer specifies it.
| Designation | Wire diameter | Wire spacing | Stocked |
|---|---|---|---|
| 661L | 7.5 mm | 150 x 150 mm | Yes |
| 663L | 6.3 mm | 150 x 150 mm | Yes |
| 664L | 6.0 mm | 150 x 150 mm | Yes |
| 665L | 5.3 mm | 150 x 150 mm | Yes |
| 668L | 4.0 mm | 150 x 150 mm | Yes |
| 338 | 4.0 mm | 75 x 75 mm | Ask us |
We also supply custom mesh for projects that need more than standard sheets, made to suit your requirements, for example a non-standard sheet size or wire layout. Tell us what you need and we will price it.
Grade 300E and 500E reinforcing bar, plain and deformed, in NZ trade sizes R, D, HR and HD.
Bar cut to length and bent to your drawings and bar schedules in our East Tamaki workshop.
Prefabricated reinforcing cages, assemblies and custom components, built in-house and delivered ready to place.
Tell us what you need over the phone, or send a price request online. Drawings and bar schedules are welcome but not required.