51a Allens Road, East Tamaki, Auckland 2016
Bundles of deformed reinforcing bar in the yard racks

Continuously threaded Grade 500E bar

ReidBar™ threaded bar and accessories

We supply Genuine ReidBar™ and the full range of ReidBar™ accessories, quoted alongside the rest of your reinforcing.

  • Sizes 12 mm to 32 mm, cut to length
  • Couplers, nuts, plates and washers, anchors, inserts and grout sleeves
  • Quoted with your bar, mesh and cut-and-bend

At a glance

Bar
Grade 500E, continuously threaded
Sizes
RB12 to RB32 (12 to 32 mm)
Lengths
Cut to length
Accessories
Couplers, nuts, anchors, plates, inserts, grout sleeves

Download handbook (PDF) PDF, 15 pages. Specifications for bar, ReidBar™, mesh and accessories.

ReidBar™ bar

Genuine ReidBar™ is a continuously threaded, hot-rolled Grade 500E reinforcing bar, made in New Zealand to AS/NZS 4671:2019.

ReidBar™ sizes (Reid™ product codes)
SizeReid codeGradeMass (kg/m)Lengths
12 mmRB12500E0.888Cut to length
16 mmRBA16500E1.578Cut to length
20 mmRB20500E2.466Cut to length
25 mmRB25500E3.853Cut to length
32 mmRB32500E6.313Cut to length
  • We cut ReidBar™ to the lengths you need. Mass figures are nominal values.

ReidBar™ accessories

ReidBar™ accessories (Reid™ product names)
AccessoryReid™ productsSizesStocked
CouplersReidBar™ Steel Coupler; ReidBar™ Ductile Cast Iron (DCI) Coupler12-32 mmYes
NutsReidBar™ Flange Nut, Half Nut and Full Nut12-32 mmYes
AnchorsReidBar™ iPort Flange Anchor16-32 mmYes
Plates and washersReidBar™ Domed Base Plate and Spherical Washer16-32 mmYes
Threaded insertsReidBar™ Threaded Insert; Steel Threaded Insert12-20 mmYes
Grout sleevesReidBar™ Grout Sleeve12-32 mmYes
  • Galvanised versions of some accessories can be ordered, often with longer lead times. Ask us if your project needs them.

Important: ReidBar™ DCI Coupler

Reid™ Construction Systems states that the ReidBar™ Ductile Cast Iron (DCI) Coupler is not compliant with NZS 3101 Amendment 3 or the NZTA Bridge Manual. It is intended for temporary threaded bar and other non-compliant uses. Where compliance is required, use the ReidBar™ Steel Coupler. Always follow Reid™'s current technical literature.

Not interchangeable with other thread systems

ReidBar™ and IMBMS use different thread systems. Do not mix their bars and fittings.

IMBMS coupler systems

IMBMS mechanical splicing: bar couplers, terminators, weldable couplers, form savers and threaded inserts, 12-40 mm.

Cut and bend

Bar cut to length and bent to your drawings and bar schedules in our East Tamaki workshop.

Need a price? Call Millier

Tell us what you need over the phone, or send a price request online. Drawings and bar schedules are welcome but not required.