51a Allens Road, East Tamaki, Auckland 2016

Photo credits

Most photographs on this website are Millier Reinforcing’s own. A few are example images from Wikimedia Commons, used under the licences below; those do not show Millier’s premises, staff or projects.

Common items photos

The photos in the common items strip are cropped and colour-adjusted versions of these photographs, shared under the same licences:

  • hd12-reinforcing-bar-example.jpg: from “Close-up of a stack of deformed reinforcing bars” by Reinhold Möller (Ermell) (CC BY-SA 4.0).
  • hd16-reinforcing-bar-example.jpg: from “Deformed reinforcing bars converging into the distance” by W.carter (CC BY-SA 4.0).
  • hr12-reinforcing-bar-example.jpg: from “Close-up of a stack of deformed reinforcing bars” by Reinhold Möller (Ermell) (CC BY-SA 4.0).
  • hd10-reinforcing-bar-example.jpg: from “Deformed reinforcing bars converging into the distance” by W.carter (CC BY-SA 4.0).
  • cut-and-bent-bar-example.jpg: from “Reinforcing bars bent to 90 degrees, stacked together” by W.carter (CC BY-SA 4.0).
  • standard-stirrups-example.jpg: from “A small reinforcing beam cage with closed stirrups, seen from above” by Patrick Oberdörfer (CC BY-SA 4.0).
  • custom-stirrups-example.jpg: from “Circular reinforcing bar shapes casting shadows on concrete” by W.carter (CC BY-SA 4.0).
  • reinforcing-mesh-example.jpg: from “Reinforcing mesh laid on bar chairs before a concrete pour” by Dig deeper (CC BY-SA 4.0).
  • bar-chairs-example.jpg: from “Reinforcing mesh laid on bar chairs before a concrete pour” by Dig deeper (CC BY-SA 4.0).
  • tie-wire-example.jpg: from “Tie wire twisted around deformed reinforcing bar” by Devil900 (CC BY-SA 4.0 (cropped)).
  • polythene-example.jpg: from “Steel fixers tying slab reinforcing over polythene underlay” by Jamain (CC BY-SA 3.0 (cropped)).

Adapted versions of CC BY-SA photos are shared under the same licence. All other photographs, and the Millier Reinforcing logo, are the property of Millier Reinforcing Ltd.